lithium-ion polymer battery for mini laptop

lithium-ion polymer battery
1.Lipo battery factory
2.50-10000mah cell
3.RC polymer battery
4.Good Ploymer cell

Pictures
Specification


Battery type
lithium-ion polymer battery
Part Number
LI
Voltage Range
2.75V to 4.2V
Nominal Voltage ( V)
3.7V
Nominal Capacity (mAh)
90-10000mAh
Max.Discharge
1C ( *1C= 1 Capacity )
Dimension (mm)

Cell+ PCM+ Wires

Length (L)
0±0.5mm
Width (W)
0±0.5mm
Height (H)
Max00mm
Weight Approx.(g)
________
Charging Method
constant current
constant voltage
Charge Voltage (V)
4.20 (±50mv)

Cell+ PCM+ Wires +Connector
Standard Charge
Constant Current 1/2C
Constant Voltage 4.2V
0.01CA cut-off
Standard Discharge
Constant Current 0.2C
Cut-off voltage 2.75V
Operating Temp
Charge:0°C to 40°C
Discharge: -20°C to 60°C
Impedance Initial (mΩ)
110 @1KHZ
Terminals/connector
soldering tabs
wires
connectors

Suitable for Cameras,GPS Receivers,PDA,Clocks,Remote Controls,Safety Devices,High Drain Devices,Cordless Phone Tools,Lighting or other device needing 3.7V power.Building portable power device needing high energy density and low weight.

In stock size:
303556-600mAh 363455-700mAh 383759-950mAh 3558120-2700mAh
3858115-2700mAh 426248-1420mAh 503870-1450mAh 553452-1050mAh
553759-1400mAh 504550-1100mAh 5048100-2700mAh 5058130-4100mAh
508075-3400mAh 102435-800mAh 603048-900mAh 355580-1750mAh
853465-2000mAh 3870105-3600mAh 435690-2500mAh 456066-1900mAh

Caution:
1.LiPoly batteries must be charged carefully.
2..The basic process is to charge at constant current until each cell reaches 4.2 V;
3..the charger must then gradually reduce the charge current while holding the cell voltage at 4.2 V until the charge current has dropped to a small percentage of the initial charge rate, at which point the battery is considered 100% charged.
4.lithium polymer batteries can be stored for one or two months without significantly losing charge. However, if storing for long periods,Please discharging the battery to 40% of full charge.